Infiltration preparation of samples for electron microscopy can be done using the PELCO®R1 Rotary Mixer. It is a single speed mixer with a slow rotational speed that ensures improved infiltration without air bubbles and is well suited for preparation of tissue samples.
The mixer consists of a cabinet that houses the motor and a Mixer Head that holds the specimen containers. It comes with the Collet Assembly already in position. Only the mixer head needs to be attached to the collet with the supplied black finger screw and locking washer.
Assembly of PELCO®R1 Rotary Mixer
If the Collet Assembly comes loose or is removed:夹子应使用提供的固定螺钉和1/16英寸的艾伦(HEX)扳手将夹子固定回电机轴。夹子应放置在柜子上约0.8毫米(1/32英寸)的位置,以便在混合器头旋转期间不会摩擦它。另一个关键点是确保固定螺钉在拧紧过程中撞击电机轴的平坦部分。然后,混合器头滑过夹头。然后将手指螺钉用锁定洗衣机插入混合头上的一个小孔,然后拧紧手指螺钉。手动拧紧足够,因为内牙洗衣机会防止手指螺钉和洗衣机头之间的滑动。
The mixer head of the 1055 and 1055-220 mixers utilize the PELCO®Glass Snap-Cap Vials Product Nos. 12701–12708. The "Snap-Cap" feature seals the contents of the vial, protecting both the sample and the operator. An optional rotator head available for this unit with a 23-hole capacity is Prod. No. 1056. Sample vials that fit this optional head are Prod. No. 410 and 411.
打开仪器后,获得约10 rpm的旋转速度。在满载时,高扭矩电动机保持仪表速度。
根据设备搁在哪个脚上,获得了55°或35°的倾斜app亚博体育。
Connection to an electrical source 110-120 V AC, 60 Hz (No. 1055), or 220-240 V AC, 50/60 Hz (No. 1055-220) is via a standard grounded electrical cord and plug. The motor circuit is protected by two 5 x 20 mm GDB 250 V (0.1 A) fuses.
If the head fails to rotate, the following should be checked:
- 电线的连接。
- 机柜后部的保险丝。
- 夹子螺钉的紧密度。
Product and accessory descriptions
产品号 |
Description |
1055 |
PELCO R1 Rotator w/1058 Head, 115 V, 60 Hz |
1055-220 |
Pelco R1旋转器W/1058头,220 V,50/60 Hz |
1058 |
R1旋转器头有12个孔(32毫米O.D.) |
1056 |
R1 Rotator Head with 23 holes, (16.3 mm O.D.) |
12701 |
Glass Snap-Cap vials, 4 ml, 23 mm D x 27 mm H |
12702 |
玻璃卡帽小瓶,8毫升,22毫米D x 39毫米h |
12703 |
玻璃卡帽小瓶,12毫升,22毫米D x 51毫米h |
12704 |
Glass Snap-Cap vials, 16 ml, 30 mm D x 40 mm H |
12706 |
玻璃卡帽小瓶,24毫升,30毫米D x 52毫米h |
12708 |
Glass Snap-Cap vials, 32 ml, 30 mm D x 63 mm H |
410 |
样品小瓶,2毫升,12毫米D x 38毫米,CS/288 |
411 |
样品小瓶,4毫升,15毫米D x 48毫米,CS/144 |


此信息已从Ted Pella,Inc。提供的材料中采购,审查和改编。亚博网站下载
For more information on this source, please visit泰德·佩拉公司(Ted Pella,Inc。)